|
|
Home > Products > FIDS42 Series
FIDS42MS1 |
![](images/line.gif) |
|
Product Overview![](images/42MS1_big.jpg)
Designed to be secure, reliable and manage able, FIDS42MS1 Platform combines
RT OS and a purpose built compact hardware platform based on Intel®
IXP425 network processor. Flexcomm designed FIDS42MS1 with IDE, USB master,
RTC to satisfy the requirements of Firewall, VPN, Residential gateway,
Set top box, Integrate access device etc. at the satellite corporate office
or enterprise application level.
Application Example
Firewall, VPN, Access or Residential Gateway
![](images/42MS1example.gif)
FIDS42MS1 provides four 10/100 Ethernet interfaces for firewall. Two
of them are IXP425 NPE directly out, other two of them are PCI interfaced
MAC. At the same time, FIDS42MS1 provides one IDE interface through PCI
interfaced chip-PROMISE.
A 533M IXP425 provides high MIPS for OS/ Protocol stack/ Application etc.
On-chip DES/ 3DES module of IXP425 is a good choice for IPSec feature.
FIDS42MS1 HW Features
¡ñ 533/266 MHz IXP42X network processor
¡ñ 8/16 Mbytes flash
¡ñ 128/256 Mbytes SDRAM
¡ñ 1/2 RS232 Control ports
¡ñ 2 10/100M Ethernet interfaces on the two NPEs of IXP425
¡ñ 0/2 10/100M Ethernet interfaces on PCI bus
¡ñ 1/2 IDE interfaces
¡ñ 1 PCI slot and one PMC interface
¡ñ RTC
¡ñ Power (voltage:5V¡À5©‡, Current:¡Ý5A ATX and power supply can be bought
from market directly, if customed, must provide 5V, POW_ON and GND)
Software Components of FIDS42MS1 SDK
¡ñ BSP/ Drivers for RT Linux and VxWorks
¡ñ Montavista Linux 3.0(2.4.18 kernel)
¡ñ Reference Design(Firewall and VPN)
¡ñ Documents about hardware configure, reference design, user manual.
I¡ñ Intel Encryption module supporting DES/3DES encryption arithmetic for
VPN application.
Physical Description
Feature |
Description |
Physical Dimensions |
14.7cm x 21.9cm |
Power |
8 Watts (max.) |
Operating Tem |
0¡ã to 50¡ã C |
Storage Tem |
-20¡ã to 60¡ã C |
Block Diagram
![](images/42MS1block.gif)
Benchmarking (RFC2544)
Testing environment:
1) SmartBits 600
2) FIDS42MS1 Xscale finishes Ethernet frame RX/TX through two NPEs
3) Test setting
Test duration (sec):
|
10
|
Number of pairs:
|
1 |
Minimum frame size (bytes): |
64
|
Initial rate (%):
|
100.00 |
Maximum frame size (bytes): |
1518
|
Step rate (%):
|
10.00 |
Step frame size (bytes): |
Custom |
Resolution rate (%): |
None |
4) Testing result
|
64
|
128
|
256
|
512
|
1024
|
1280
|
1518
|
Throughput |
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
Latency (uS) |
105.20
|
103.50
|
105.20
|
104.60
|
106.90
|
105.90
|
104.50
|
Frame Loss Rate (Packet)
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
Back-to-Back frames |
1488100
|
844590
|
452900
|
234960
|
119730
|
96150
|
81270
|
Features and Benefits
Feature |
Benefits |
FIDS42MS1 |
Intel®IXP425 network processor
|
A flexible and intelligent network processor |
Flash
|
8 MB FLASH (up to 32M) |
SDRAM
|
128 MB SDRAM (up to 256M) |
Intel 82559 Fast Ethernet Multifunctional
PCI Bus
|
Debugging port or network traffic port |
Controller
|
Reset LED, 2NPE Ethernet ports / two 82559
|
Front panel
|
Ethernet port and their LEDs |
IDE
|
Promise 20.275 support PCI-IDE |
USB |
CY7C 67300 support master mode |
FIDS42MS1 SDK 1.0 |
BSP/ Drivers for RT Linux and VxWorks |
RedBoot is a standardized embedded debug and
bootstrap solution |
Encryption module for VPN application
|
Intel Encryption module supporting DES/3DES
encryption arithmetic for VPN application. |
Montavista Linux 3.0
|
2.4.18 embedded kernel |
Documents |
About hardware configuration, reference design,
user manual. |
View PDF
![](images/linex.gif) |
Contact Information:
![](images/logo_new.gif)
www.flexcomm.com.cn
For technical support, please contract our support at support@flexcomm.com.cn
For business issues, please contact our sales at sales@flexcomm.com.cn.
Tel: +86-21-54109960 ext. 350
Fax: +86-21-54109876
12F, Xu Hui Yuan Buiding, No.1089 Zhongshan No.2 Road(S), Shanghai,
China
|
|
|