|
|
|
Home > Products > FIDS42 Series
| FIDS42MM1 PrPMC Board |
 |
|
|
Product Overview
 FIDS42MM1
Processor PCI Mezzanine Card (PrPMC) is a high-performance processing
element that utilizes Intel® IXP425 network processor which is a low
power and high performance XScale CPU. The FIDS42MM1 offers OEMs a standard
module to easily customize and upgrade designs and reduce time to market.
It can be used in broadband access and edge service markets such as broadband
access (Intelligent DSLAM), metro routers, edge service and 2.5/3G wireless
system (CDMA2000 or WCDMA system).
The Pn1/ Pn2 connectors of the FIDS42MM1 provide a 32 bit 33/66 MHz PCI
interface to the PMC on the carrier board as well as providing power and
ground. Two 10/100 BaseT Ethernet ports(NPE) of IXP425 processors are
bring out to front panel. For applications requiring additional data interconnect,
FIDS42MM1 also provides the third 10/100M FEs port though an INTEL 82559.
To maximize interconnection flexibility and bandwidth, the FIDS42MM1 brings
two NPEs, fast UART, HSS bus and extend bus to Pn3/ Pn4 PrPMC connectors.
So, coupled with different carrier boards, FIDS42MM1 can provide different
hardware features to enable OEMs to focus on their application specific
requirements while simplifying product development and upgrades.
Application Example
Distribute Application
FIDS42MM1 can be used in distribution applications to replace 6U cPCI
CPU board. In following example, network traffic is distributed by front
equipment, such as FIDS1200, to multi-FIDS42MM1 to process. In such solution,
system density is four times than 6U CPU board solution, and price half.
FIDS42MM1 PrPMC Features
1. 533/400/266 MHz IXP425
2. 8 Mbytes flash (4M, 8M, 16M, 32M)
3. 128 Mbytes SDRAM (256 M)
4. Two UARTs
5. Two HSS /1 USB
6. PMC interface
7. Four 10/100M Ethernet interfaces
8. Front panel
1) Three RJ45 connectors with LINE/ ACTIVE indicator LEDs
2) Reset / power indicator LEDs
Software Components of SDK
¢ BSP/ Drivers for RT Linux and VxWorks
¢ Montavista Linux 3.0(2.4.18 kernel)
¢ Reference Design, user manual
Physical Description
| Feature |
Description |
| Physical Dimensions |
Standard PMC board |
| Power |
5 Watts (max.) |
| Operating Tem |
0＜ to 50＜ C |
| Storage Tem |
-20＜ to 60＜ C |
Block Diagram
Benchmarking (RFC2544)
1) SmartBits 600
2) FIDS425P XScale finishes Ethernet frame RX/TX through two NPEs
3) Test setting
Test duration (sec):
|
10
|
Number of pairs:
|
1 |
| Minimum frame size (bytes): |
64
|
Initial rate (%):
|
100.00 |
| Maximum frame size (bytes): |
1518
|
Step rate (%):
|
10.00 |
| Step frame size (bytes): |
Custom |
Resolution rate (%): |
None |
4) Testing result
|
64
|
128
|
256
|
512
|
1024
|
1280
|
1518
|
| Throughput |
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
| Latency (uS) |
105.20
|
103.50
|
105.20
|
104.60
|
106.90
|
105.90
|
104.50
|
Frame Loss Rate (Packet)
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
| Back-to-Back frames |
1488100
|
844590
|
452900
|
234960
|
119730
|
96150
|
81270
|
Features and Benefits
| Feature |
Benefits |
| FIDS42MM1 |
Board style
|
PrPMC |
Intel®IXP425 network processor
|
A flexible and intelligent network processor |
Flash
|
8 MB FLASH (up to 32MB) |
SDRAM
|
128 MB SDRAM (up to 256MB) |
Ethernet
|
Two NPEs and two Intel 82559s |
PMC connector
|
Flexibility to connect a wide range of industry
standard I/O modules |
| Front panel |
Reset LED, 2NPE Ethernet ports / one 82559
Ethernet port and their LEDs |
| FIDS42MM1 SDK 1.0 |
BSP/ Drivers for RT Linux
|
RedBoot is a standardized embedded debug and
bootstrap solution |
Montavista Linux 3.0
|
2.4.18 kernel embedded kernel |
| Documents |
About hardware configuration, reference design,
user manual. |
View PDF
 |
|
Contact Information:
www.flexcomm.com.cn
For technical support, please contract our support at support@flexcomm.com.cn
For business issues, please contact our sales at sales@flexcomm.com.cn.
Tel: +86-21-54109960 ext. 350
Fax: +86-21-54109876
12F, Xu Hui Yuan Buiding, No.1089 Zhongshan No.2 Road(S), Shanghai,
China
|
|
|
PXA27x
based