|
|
|
Home > Products > IXP12xx based
FIDS1200S System
Uniform Platform for Firewall
/ IDS / Network Monitor / Load Balance etc. |
 |
|
|
Product Overview
 Next-generation
multi-service network products must meet the growing user demand for the
integrated solution of packet filter and state-check techniques. In addition
to implementing pivotal technologies, such as multi-layer filter and content
detection at wire speed, under stringent time-to-market deadline, equipment
manufacturers must deliver their products that can be easily upgraded
in software. This capability is important because it can facilitate the
cost-effective deployment of new services without extensive hardware replacement.
Based on Intel IXP1200 network processor, FIDS 1200S meets these requirements
richly. Intel 's network processor delivers high-performance and flexibility
to value-add services because of its powerful parallel and programmable
multi micro-engines. In conjunction with HW platform-FIDSMM1/ FIDS12CC3/FIDS12CP1
and FIDS1200S SDK, FIDS1200S can dramatically meet the requirement of
next generation Firewall, IDS, Network monitoring, Load balance, Content
filter etc, Traffic statistics/ accounting, Protocol analysis.
Product Highlights
¡ñ Accelerates time-to-market of security products based on IXP1200,
IXF1002/ IXF440/ IXF6012
¡ñ Platform subsystem include FIDS12MM1 - base card, which is a card with
Intel Network Processor IXP1200, interface card, and BSP-level / Application
level software for IDS and Firewall
¡ñ FIDS12CC3 8FE-2GE cPCI interface card, FIDS12CP1 8FE-2GE PCI interface
card or other customized interface card
¡ñ FIDS 1200S SDK 1.0 include:
1. BSP/ Drivers for RT Linux and VxWorks
2. Reference designs.
3. Documents of system structure/ software structure/ interface spec.
Hardware, software, document and tools form a total platform.
FIDS1200S HW System
¡ñ FIDS12MM1 - base card
¡ñ FIDS12CC3 -8FE-2GE cPCI interface card
FIDS12MM1 - NPU Base Card
The FIDS12MM1 Network Processor Base Card is a PMC interface card that
will be connected to FIDS12CC3 or FIDS12CP1. It includes a 200 MHz IXP1200
network processor with 66 MHz IX Bus and a memory subsystem consisting
of 16 Mbytes of flash memory, 8 Mbytes of SSRAM, and 256 Mbytes of SDRAM.
FIDS12CC3 cPCI interface card
Including an Intel IXF440 Dual-Speed Multi-port Ethernet MAC and an Intel
IXF1002 Dual-Port Gigabit Ethernet MAC, FIDS12CC3 provides eight 10BASE-T
or 100BASE-T connectors and 2 GE connectors.
The front-panel features:
¡ñ Eight 10/100 RJ-45 Ethernet connectors, or
¡ñ Two Gigabit Ethernet connectors
¡ñ One recessed master reset switch
¡ñ Green and red pass and fail indicator LEDs
Physical Description
| Description |
Specification |
| Power |
32 Watts (max.) |
| Operating Tem |
0¡ã to 50¡ã C |
| Storage Tem |
-20¡ã to 60¡ã C |
Benchmarking (RFC2544)
Testing environment:
1) SmartBits 600
2) 2) FIDS1200 Micro-engine finishes Ethernet frame RX/TX
3) Test setting
Test duration (sec):
|
10
|
Number of pairs:
|
1 |
| Minimum frame size (bytes): |
64
|
Initial rate (%):
|
100.00 |
| Maximum frame size (bytes): |
1518
|
Step rate (%):
|
10.00 |
| Step frame size (bytes): |
Custom |
Resolution rate (%): |
None |
4) Testing result
|
64
|
128
|
256
|
512
|
1024
|
1280
|
1518
|
| Throughput |
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
100%
|
| Latency (uS) |
8.30 |
10.50 |
16.20 |
23.90 |
22.30 |
27.10 |
23.50 |
Frame Loss Rate (Packet)
|
0
|
0
|
0
|
0
|
0
|
0
|
0
|
| Back-to-Back frames |
14880950 |
7621950 |
4222970 |
2185310 |
1108160 |
895420 |
752110 |
Features and Benefits
| Feature |
Benefits |
| FIDS12MM1 - Network Processor PMC card |
Intel®IXP1200 network processor
|
A flexible and intelligent network processor |
| Memory subsystem - 256 MB SDRAM, 6MB SSRAM |
Fast table-lookup support |
16 MB FLASH
|
Hardware platform to meet various requirement |
IX Bus connector
|
Flexibility to connect a wide range of I/O
devices to the IntelIntel®IXP1200 network processor IX Bus interface |
| PMC connector |
Additional flexibility to connect a wide range
of industry standard I/O modules to the Intel IXP1200 network processor
|
| FIDS12CC3 - Gigabit Ethernet and Fast Ethernet
CPCI Interface card |
Intel 21555 Non-Transparent PCI-to-PCI Bridge
|
Enables connection to an embedded CompactPCI
controller board
|
IXF1002 Dual Port Gigabit Ethernet Controller
(MAC)
|
Provides two Gigabit Ethernet ports
|
| IXF440 Dual-Speed Multi-port Ethernet Controller
(MAC) |
Eight direct 10/100 Ethernet ports |
| FIDS12CP1 -Gigabit Ethernet and FE PCI
interface card |
Intel 21555 Non-Transparent PCI-to-PCI Bridge
|
Enables connection to an embedded CompactPCI
controller board |
IXF1002 Dual Port Gigabit Ethernet Controller
(MAC)
|
Provides two Gigabit Ethernet ports |
IXF440 Dual-Speed Multi-port Ethernet Controller
(MAC)
|
Eight direct 10/100 Ethernet ports |
| Two LXT9763 10/100 Base-T Ethernet PHYs |
Eight direct 10/100 Ethernet connections |
| FIDS1200S SDK 1.0 |
Software libraries and micro-code macros
|
Accelerated software development to speed
time-to-market, efficient using of control stores |
Firewall and IDS reference design
|
|
Sample applications code, boot code, and
Diagnostics function
|
|
Device drivers
|
|
| BSP for VxWorks, Linux |
|
View PDF
 |
|
Contact Information:
www.flexcomm.com.cn
For technical support, please contract our support at support@flexcomm.com.cn
For business issues, please contact our sales at sales@flexcomm.com.cn.
Tel: (86)-755-26532305 / 26532306
Fax: (86)-755-26014666
3F, Block 1, No.2 Industrial Zone, KeFa Road, Hi-Tech Park, Nanshan District,
Shenzhen, 518057 P.R.China.
|
|
|
PXA27x
based